Comark RF500 Manual de usuario descargar pdf (Pagina 35)

FCC Approvals

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

three conditions:

• This device may not cause harmful interference, and

• This device must accept any interference received, including interference that may

cause undesired operation.

• To reduce potential radio interference to other users, the antenna type and its gain

should be so chosen that the equivalent isotropic radiated power (e.i.r.p.) is not more

than that permitted for successful communication.

Transmitters must be placed greater than 20cm from the body.

Equipment Ratings

Supply Voltage

Comark will provide mains adaptors with plugs to suit your country, if the correct socket

adaptor has not been provided please contact Comark for a replacement.

Mains adaptors supplied for use with RF500 Gateway and Transmitters have been

designed for worldwide use over the following voltage and frequency ranges.

Voltage 90-240 VAC

Frequency 50/60Hz

Only use adaptors as supplied by Comark and do not attempt to use others as damage to

the equipment and voiding of the CE approval may occur.

Environmental Conditions

All RF500 equipment is designed for indoor use only.

(Some outdoor installation of RF500 Transmitters is permitted. Contact Comark for details)

Gateway Storage/Operating Conditions

Temperature +5°C to +35°C

Humidity 10-90% RH (Non-condensing)

RF51X Transmitter Operating Conditions

Temperature –30 to +70°C

Humidity 10-90% (Non-condensing)

RF51X Transmitter Storage Conditions

Temperature –40 to +85°C

Humidity 10 to 90% RH (Non-condensing)

RF515 Maximum Input Conditions

0-1V Range 0 - 3V

0-10V Range 0 - 30V

4-20mA Range 0 - 100mA

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 41 42

Sin comentarios

Comark RF500 Manual de usuario Pagina 35